Finished And Semi-finished Cemented Carbide Products

A.Catalogue Of Finished And Semi-finished Tungsten Carbide Porducts

  1. Cemented Carbide Cutting Tool Tips ( Brazed Cemented Carbide Tips)
  2. Cemented Carbide Indexable Inserts
  3. Cemented Carbide Parts for Mining and Geological Prospecting
  4. Cemented Carbide Parts for Rock Drilling, Coal-Mining
  5. Cemented Carbide Parts for Granite Processing, Drilling Cement etc
  6. Cemented Carbide Drill Bits and Tricone Drill Bits for Oil Mining
  7. Cemented Carbide Drawing dies and Assemble Tools
  8. Cemented Carbide (Diamond) Anvils(2-face and 6-face) and Diamond Cylinders
  9. Cemented Carbide Wear Parts and Wearing Welding Rod
  10. Cemented Carbide Micron Drills(Undercut and Common) for Electronics Industry
  11. Cemented Carbide Rolls, Punch-pressing Dies and Sealing washers
  12. Cemented Carbide Rods, Tubes and Strips
　
B. Introduction To our Cemented Carbide Products
 
Chinese Grade
　
ISO
Physical&Mechanical Properties
　
Applications
Bending Strenght
Hardness
(HRA)
Kg/mm2
N/ mm2
YG6
K20
>/=145
>/=1900
90.5
For semi-finishing and finishing cast iron, non-ferrous metals and their alloys non-metallic materials at medium cutting speed.
YG8
K30
150
2200
90.0
For low speed roughing cast iron, non-ferrous metals and their alloys, non-metallic materials.
YG3X
K01
110
1420
92.5
For high speed finishing small chip sections for cast iron, non-ferrous metals and their alloys, hardened steel and alloy steel.
YG6X
K10
140
1800
92.0
For finishing and semi-finishing medium and small chip sections for chilled cast iron, nodular cast iron, grey cast iron and heat-resisting alloy at high speed.
YG6A
K10
140
1800
92.0
GN3
K30
160
2100
90.0
For high speed cutting alloy steel such as cast iron, white cast iron nodular cast iron, and stainless steel of Cr and Ni
YW1
M10
120
1400
92.0
For medium speed semi-finishing steel, refractory steel, manganese steel and cast iron
YW2
M20
135
1600
91.0
For roughing and semi-finishing low machinability steel such as refractory steel,manganese steel and stainless steel at medium and low speed.
YT5
P30
140
1500
90.0
For medium and low speed roughing large chip sections for steel cast iron and alloy steel under unfavourable conditions.
YT15
P10
110
1420
91.0
For semi-finishing medium chip sections or finishing small chips sections for steel cast steel and alloy steel.
YT30
P01
90
1100
92.5
Well wear resistant,for finishing small chip of steel and alloy steel at high cutting speed under favourable conditions
YG4C
 　
145
1600
89.5
For tipping drill bits of oil, coal mining and geological prospecting
YG8C
 　
175
1800
88.5
YG11C
 　
210
2200
88.0
For tipping mining bits of "K" type drills-cone and holedrills
YG15
G30
210
2500
87.0
NK1
 　
210
2500
87.5
YR30
 　
245
2900
88.0
YK03
(GIL)
K03
140
 　
91.5+/-0.5
For making microdrills, twist drills, vertical milling cutters indexable files etc
MK50
G40
250
2600
86+/-0.6
For making typing needles, rollers, cool punching dies, rods, tubes, strips and structural materials
YS10
(D25)
S10
180
 　
89.5+/-0.5
For making carious wear parts of rods,tubes,strips,ec
UM
G30
200
 　
90.7+/-0.4
For making various small microdrills, vertical milling cutters, indexable files etc
FN3
 　 　 　
25-35(HRC)
For making equilibrious hammers, gyroscope and X ray shield etc
STA
M30
 　
2000
91.0
Sino-Tungsten(XM)'s Grade, for low speed roughing of non-metallic materials and wear parts of timepieces.
STB
 　 　
2500
90.0
Sino-Tungsten(XM)'s Grade, special for anvils making of cemented carbide
STC
M40
 　
2600
90.0
Sino-Tungsten(XM)'s Grade, for making small microdrills vertical milling cutters indexable files etc.
STD
 　 　
2600
88.0
Sino-Tungsten(XM)'s Grade, for making typing pressure cylinders rods, tubs, strips etc
STE
 　 　
2800
85.0
Sino-Tungsten(XM)'s Grade, for impact resistant materials such as rolls cold punching dies etc.

C.Introduction To Our Cemented Carbide Wear Parts
 
Grade
Transverse Repture Strength
Density 
g/cm3
Hardness
Type
Application
(Drawing die black)
HRA HV
YL05
1250(N/mm2)
15.10
        1880
A
For ferrous metal wires
YG3X
1450
15.10
 91.5
B
For non-ferrous metal wires
YL10.1
1600
14.9
1500
C
For ferrous metal rods
YG6
1800
14.9
 89.5
D
For non-ferrous metal rods
YL10.2
1700
14.5
1600
E
For round tubes of ferrous metals
YL15.1
1250
14.9
1750
F
For round tubes of non-ferrous metals
YL20
1500
14.9
1500
L
For rectangular parts of ferrous metals
YG8
1800
14.7
 89.5
N
For rectangular parts of non-ferrous metals
YL30
2000
14.3
1250
Li
For square parts of ferrous metals
YL50
2100
13.9
1150
Ni
For square parts of non-ferrous metals
YG15
2200
13.9
 87.0
R
For hexagonal parts of ferrous metals
YGH60
2350
13.3
 82
S
For hexagonal parts of non-ferrous metals
YG20C
2350
13.3
 82.5
H
As sintered hard metal blanks used in heading dies for standard bolts
　 　 　 　
K
As sintered hard metal blanks used in cold forging dies for hexagous nut
We can supply Cemented Carbide wear Parts as our standard or according with your requirements