Tungsten Carbide Grade

Properties & Applications of Carbides for Die and Wear Part Making

Grade Typical property values Performance & Applications
Density
g/cm3
Bending
Strength
N/mm2
Hardness
HRA
YG3X 15.0~15.3 1080 >=91.5

     For drawing of steel non-ferrous metal and alloy wire of <=Ø 2mm,esp, for fine wires of <=Ø0.6mm,under low stress condition

YG6X 14.6~15.0 1370 >=91

     For drawing of steel wires and non-ferrous metal wires or bars of <=Ø 6.0mm under low-stress condition.

YG6 14.6~15.0 1420 >=89.5

     For drawing of steels, non-ferrous metal and alloy bars of <=Ø 20mm or tubes of<=Ø10mm ,under the condition of higher stress.

YG8 14.5~14.9 1470 >=89

     For drawing and straightening steels, non-ferrous metal and alloy bars and tubings; and for fabricating of machine parts, tools and wear parts, such as nozzles centres, guiding devices, upsetting dies and perforating tools.

YG15 13.9~14.2 2060 >=87

     For drawing of steel bars and pipes at high reduction; and also for upsetting, perforating and stamping tools under higher-stress conditions.

YG20 13.4~13.7 2450 >=85

     For fabricating of stamping dies for watch parts, spring plates of musical instruments, batters jars, small sized steel balls, screws, screwcaps, etc; and for press plates for hot rolling of twist drill bits.

YG20C 13.4~13.7 21960 >=82

     For cold forging, punching pressing dies for standard components bearings and tools industries etc; and for punching dies for bullet heads and cartridges. 

YWC Hm<1.0005 1700 >=87.5

     Magnetic conductivity non-magnetic alloy with very high strength ,excellent  wear resistance and very low magnetic conductivity . used for forming die for permanent-magnetic materials with a high service endurance up to 0.5~1M times

This type  is our standard products, if you are interested in it or you have any question, please let us know the details of your requirements and this type number. Or please fill in the form given in our Terms & Conditions.

© Copyright 2000  ChinaTungstenOnline