Cutting Steel Class Grade Facts
Grade |
ISO Grade |
Density g/cm3 |
Hardness HRA> |
T.R.S>N/mm² |
Performances or recommended applications |
Cutting steel class grade |
YT03 |
P10 |
14.75-14.95 |
91.5 |
1860 |
Suitable for the semi-finishing and finishing machining of non-ferrous metals, stainless steel |
YT5 |
P30 |
11.50-13.20 |
90.0 |
1750 |
Suitable for heavy duty cutting of steel and cast steel and for a low-speed and medium-speed and a big feed-rate roughing operation under unfavorable machining conditions |
YT14 |
P20 |
11.20-11.80 |
91.0 |
1550 |
Suitable for semi-finishing and finishing machining of steel and cast steel, using a medium feed-rate |
YT15 |
P10 |
11.10-11.60 |
91.5 |
1500 |
Suitable for semi-finishing and finishing machining of steel and cast steel and a medium feed-rate and a rather high cutting speed is to be recommended |
YS25 |
P25 |
12.80-13.20 |
91.0 |
1860 |
A special grade for mining steel and cast steel |
SC30 |
P30 |
12.70-13.20 |
90.0 |
1600 |
Suitable for heavy duty cutting of steel and cast steel with a possible big feed-rate |
YC40 |
P40 |
13.00-13.40 |
89.5 |
1860 |
Suitable for heavy duty cutting of steel and cast steel with a possible big feed-rate and for face milling as well |
YW1 |
M10 |
12.85-13.40 |
92.0 |
1380 |
Suitable for semi-finishing and finishing of stainless and ordinary alloyed steel |
YW2 |
M20 |
12.65-13.35 |
91.0 |
1680 |
Suitable for semi-finishing and finishing of stainless and low alloyed steel, mainly used for machining of trains' wheel hubs |
YW3 |
M10 |
12.85-13.10 |
92.0 |
1420 |
It is suitable for semi-finishing and finishing of stainless and ordinary alloyed steel |