Cemented Carbide Drill Processing Abnormal &Solutions
Cemented carbide drill tool is used for drilling in the solid material through holes or blind holes and reaming of the existing holes.
Cemented carbide drill processing abnormal causes and countermeasures
Situation | Reasons | Solution |
Drilling into the oval | Form threaded scratches | 1.Using a suitable drill sets 2.Reduce the clearance angle 3.Check the drill bit tip angle is symmetrical with both sides length |
Produce fibrillation, vibration | 1.Reduce the clearance angle 2.Web thinning 3.Shorten cemented carbide drill length , increased drill bit rigidity 4.Check cemented carbide drill angle grinding is correct or not 5.Check the fixture cemented carbide drill contact situation 6.Pre-drilled center hole 7.Improve the rigidity of the working machine |
|
The chip discharge is not easy | 1.Increase the weekly amount of feed 2.Select the correct helix angle 3.Increasing the groove width ratio 4.Intermittent feed |
|
Drilling tilt | Adverse when cutting | 1.Using the appropriate drill sets 2.Reduce the cut when the weekly amount of feed 3.Pre-drilled center hole |
Drill rigidity is bad | Shorten cemented carbide drill length , increased drill bit rigidity | |
Drill bit angle is wrong | Resharpening cemented carbide drill | |
Exterior angle wear | Cutting speed is too fast | 1.Reduce the cutting speed 2.Increase the clearance angle 3.Sufficiently supplied cutting fluid 4.Improve cemented carbide drill material |
Hole wall roughness | Blade wear is too large | Resharpening cemented carbide drill |
Feed speed too large | Lower feed speed | |
Cutting obstruction | Increase the number of retraction | |
Other | 1.Web thinning 2.Use suitable guide bush 3.Improve the rigidity of the working machine |
|
Drill breaks while cutting | Feed too large | To reduce Every feed rate |
Cutting obstruction | 1.Increasing the groove width ratio 2.Select the appropriate helix angle |
|
Insufficient rigidity of the drill | 1.Reduce the weekly amount of feed 2.Shorten drill length and increase cemented carbide drillrigidity 3.Increase web thickness |
|
1.Reduce weekly feed 2.working remains fixed 3.Improve the rigidity of the working machine |
||
Chipping of the cutting edge | Feed too fast | Reduce the weekly amount of feed |
Insufficient strength of the cutting edge | 1.Reduce the clearance angle 2.Reduce weekly feed 3.working remains fixed |
|
For use in the operations of the counterbore | 1.Increase the drill tip angle 2.Reduce the cutting speed |
|
Pore size-tolerance | Drill tip angle is not symmetrical or blade different sizes | 1.Resharpening cemented carbide drill 2.Web thinning 3.To reduce cemented carbide drill tip angle 4.Use drill sets |
Chinatungsten Online can provide various sizes and grades of cemented carbide cutting tools, non-standard products are also customized according to customer requirements. Welcome to consult and purchase sales@chinatungsten.com, sales@xiamentungsten.com .