P Steel
| Basic Grades |
Application |
| GC4030(HC)–P25(P10–P40) |
Coated cemented carbide milling grade for medium to high speeds hardness up to HB 300 non-alloy steel and low alloy steel light to heavy milling (wet and dry). |
| GC4040(HC)–P40(P25–P50) |
Coated cemented carbide milling grade is used for toughness demanding steel milling process, and also very suitable for small batch of mixed materials. Low to medium cutting speed; work well with or without coolant. |
| GC1025(HC)–P10(P05–P20) |
PVD coated cemented carbide grade steel for light milling. The first choice is peripheral-edge grinding of the blade the combination of the viscous material for low carbon steel. |
| CT530(HT)–P20(P05–P30) |
High resistance to plastic deformation resistance and adhesion / BUE resistance make it applicable to a wide range of cutting speeds, mainly cermets grades coolant light milling step. It is the ideal grades for Wiper blades. |
| SM30(HW)–P30(P20–P40) |
Non-coated carbide grade for low to medium cutting speed semi-finishing and roughing milling. In the hard material and under unstable conditions, with good edge security |
| GC4020(HC)–P15(P05–P25) |
Coated cemented carbide grade for light to heavy milling (for example, to obtain the highest productivity in hardened steel or high cutting speed cutting) steel at high temperatures. |
| Supplementary Grades |
Application |
| P10A(HC)–P10(P05–P15) |
PVD coated cemented carbide milling grades steel for light milling. Combined with high-precision grinding edge is the first choice of profiling milling finishing. |
| P20A(HC)–P15(P10–P20) |
Combined with high-precision grinding blade, is used for cemented carbide milling grades of PVD coatings for steel milling. Choice for semi-finishing and contour milling applications, but also with a blade center the first choice all applications of cutting (zero vc). Applicable to the machine speed is limited. |
| GC2030(HC)–P25(P15–P35) |
PVD coated cemented carbide milling grades are used for the milling of the dust accumulation easy to produce a low carbon steel of, and also very suitable for the milling of the mixed material 90 degrees. |
| GC2040(Hq–P40(P30–P50) |
Coated cemented carbide milling grade, under low-speed cutting and need toughness grades, combined with a sharp cutting edge for steel milling. It is very suitable for small batch production of mixed material. |
| GC3040(HC)–P20(P10–P30) |
Coated cemented carbide milling grade, has a good abrasive wear resistance, which is a medium to high speed rough milling of steel required performance. |
M austenitic / ferritic / martensitic stainless steel
| Basic Grades |
Application |
| C1025(HC)–M15(M10–M20) |
PVD coated cemented carbide milling grade for light milling of stainless steel. The combination of the blade and peripheral-edge grinding is the first choice of tack and hardening the material. |
| GC2030(HC)–M25(M15–M35) |
PVD coated cemented carbide milling grades for stainless steel (austenitic) medium to high speed milling. The combination of positive rake angle grooved also applies to the heat-resistant material, and titanium. |
| GC2040(HC)–M30(M20–M40) |
Coated cemented carbide grade for easy to produce the abrasive wear stainless steel, ferritic / martensitic stainless steel and the PH steel medium speed milling. Also be used for small volume production of the hybrid material. |
| Supplementary Grades |
Application |
| P10A(HC)–M10(M05-M15) |
PVD coated cemented carbide milling grade for light milling of stainless steel. Combined with high-precision grinding edge is the first choice of profiling milling finishing. |
| P20A(HC)–M15(M10-M20) |
Combined with high-precision grinding blade, It is used for cemented carbide milling grades of PVD coatings for steel milling. It is the first choice for semi-finishing and contour milling applications, but also with a blade center of choice for all applications of cutting (zero VC). Applicable to the machine speed is limited. |
| GC4040(HC)–M40(M20–M40) |
Coated cemented carbide milling grades is used for stainless steel castings in the reload process. It is ideal for small batch of mixed materials. |
| CT530(HT)–M20(M10–M30) |
Austenitic / duplex stainless steel light milling cermets' grades. High resistance to plastic deformation, and anti-adhesion / BUE the sexual make it applicable in dry cutting a wide range of cutting speeds. |
| SM30(HW)–M30(M25–M35) |
Non-coated cemented carbide milling grades are used for low to medium cutting speed semi-finishing and roughing milling. Has a good edge security in unstable conditions. |
| GC4030(HC)–M15(M10–M25) |
Coated cemented carbide milling grades for martensitic stainless steel light to heavy milling |
K cast iron
| Basic Grades |
Application |
| GC3020(HC)–K20(K10–K30) |
Semi-finishing and roughing of gray cast iron coated cemented carbide milling grade, mainly used for dry cutting conditions. In the medium to high cutting speed to predictable tool life. |
| GC3040(HC)–K30(K20–K40) |
Coated cemented carbide milling grade is used for toughness demanding cast iron milling, such as ductile iron milling, wet conditions milling or high tensile strength cast iron milling. In the low to medium cutting speed to predictable tool life. |
| CB50(BN)–K05(K01–K10) |
CB50 CBN tipped grades. It combines a high cutting edge safety and good abrasion resistance. CB50 is very suitable for the machining of cast iron in good condition. |
| CC6090(CN)–K10(K05–K15) |
Silicon nitride ceramic grade for gray cast iron and high cutting speed light roughing to semi-finishing. |
| K20W(Hq–K25(K15-K35) |
Coated cemented carbide milling grades is used for gray cast iron used in wet conditions in the rough milling. Can be used for low to medium cutting speed. |
| K20D(HC)–K20(K10–K30) |
The coated cemented carbide has good balance between hardness and toughness. Under roughing milling in cast iron have good performances in dry cutting conditions. |
| Supplementary Grades |
Application |
| P10A(HC)–K10(K05-K15) |
PVD coated grade for light milling of cast iron. Combined with high-precision grinding edge is the first choice of profiling milling finishing. |
| P20A(HC)–K15(K10-K20) |
Combined with high-precision grinding blade, PVD coated grades for cast iron milling. Choice for semi-finishing and contour milling applications, but also with a blade center of choice for all applications of cutting (zero vc). Applicable to the machine speed is limited. |
| H1P(HW)–K05(K01–K10) |
Coated cemented carbide milling grade for finishing of cast iron, bronze and brass, also suitable for the wiper blade. |
| H13A(HW)–K25(K15–K30) |
Uncoated grades, good wear resistance and toughness for medium cutting speed of light load contained milling. It is the ideal choice of Ferritic Ductile Iron Milling. |
| GC4020(HC)–K25(K15–K30) |
Coated cemented carbide milling grades are used for the medium speed of light to heavy milling. Advantages of the thin coating process instead of GC3000 grade. |
| GC4030(HC)–K30(K25–K35) |
Coated cemented carbide milling grades are used for ductile iron light to heavy milling. |
| GC4040(HC)–K35(K30–K40) |
Coated cemented carbide milling grade is used for toughness demanding low speed to heavy process. |
N non-ferrous metals, plastics, wood
| Basic Grades |
Application |
| CDlO(Dp)-N05(N01–N10) |
Polycrystalline diamond tipped grades for the cutting of non-ferrous metals and non-metallic materials. Provides a long tool life, the cleaning of the cutting and good surface quality. |
| H10(HW)–N10(N05–N15) |
The non-coated fine grain carbide milling grades can provide excellent sharpness of the cutting edge, for the milling of aluminum. |
| Supplementary Grades |
Application |
| CT530(HT)-N15(N10–N25) |
Cermets grades, because it is not easy to produce BUE and the light weight of the blade, mainly recommended for high-speed aluminum cutting. |
| GC1025(HC)–N15(N10–N25) |
PVD coated cemented carbide milling grades for aluminum alloy coarse milling, the grinding cutting edge. |
| H10F(HW)–N20(N15–N25) |
Non-coated cemented carbide milling grades, combined with a sharp cutting edge for aluminum milling. |
| H13A(HW)–N15(N10-N20) |
Non-coated cemented carbide milling grades, combined with a sharp cutting edge for aluminum milling. |
S heat-resistant alloy and titanium alloy
| Basic Grades |
Application |
| GC1025(HC)–S15(S10–S20) |
PVD coated cemented carbide milling grades for middle-speed milling of heat resistant super alloys. Good anti-BUE and resistance to plastic deformation. |
| H10F(HW)–S30(S25–S35) |
Uncoated fine grain cemented carbide milling grades. High resistances to notch wear resistance make it suitable for the milling of aerospace materials (such as titanium). |
| GC2030(HC)–S25(S15–S25) |
PVD coated cemented carbide milling grades for heat resistant super alloys and low-speed semi-finishing to light roughing. |
| Supplementary Grades |
Application |
| H13A(HW)–S20(S15–S25) |
Non-coated cemented carbide milling grades with good abrasive wear resistance and toughness. It is used for heat resistant super alloys using the medium cutting speed and feed milling. |
| GC2040(HC)–S30(S20–S40) |
Coated cemented carbide milling grades for milling cast heat-resistant alloys. |
H hardened steel
| Basic Grades |
Application |
| CB50(BN)–H05(H01–H10) |
CB50 CBN tipped grades. It combines a high edge security with good abrasion resistance. CB50 is very suitable for the cutting of hardened steel in good condition. |
| CC6090(CN)–H10(H05–H15) |
Silicon nitride ceramic grades are used for chilled cast iron to the high-speed semi-finish milling. |
| C4020(HC)–H25(H15–H30) |
Coated cemented carbide milling grades are used for the light roughing hardened steel up to HRC 60 the highest hard under the adverse conditions and able to withstand high temperatures. |
| Supplementary Grades |
Application |
| P10A(HC)–H10(H05–H15) |
PVD coated grade for light milling of hardened steel. Combined with high-precision grinding edge is the first choice of profiling milling finishing. |
| CT530(HT)–H25(H10–H25) |
Cermets grade is used for finish milling hardened steel parts in low to medium speed. |
| GC3020(HC)–H15(H10–H20) |
Coated cemented carbide milling grades are used for conditions and medium speed rough milling hardened steel. |
| GC3040(HC)–H25(H20–H30) |
Coated cemented carbide milling grades, in good condition steel low to medium speed rough milling |
| C1025(HC)–H15(H10–H20) |
PVD coated grades, low to medium-speed milling for hardened parts. |
| H1P(HW)–H10(H05–H15) |
Non-coated cemented carbide milling grades for medium cutting speed finishing of chilled cast iron |
Chinatungsten Online can provide various sizes and grades of cemented carbide cutting tools, non-standard products are also customized according to customer requirements. Welcome to consult and purchase sales@chinatungsten.com, sales@xiamentungsten.com .
sales@chinatungsten.com
闽公网安备 35020602000140号